|Grade:||300 Series||Standard:||JIS, AiSi, ASTM, GB, DIN, EN|
|Technique:||Hot Rolled, Cold Rolled||Model Number:||Ams 316 316l Stainless Steel Strip|
|Project Name:||Uns S31603 316l Stainless Steel Strip||Tolerance:||±1%|
0.2mm Stainless Steel Sheet Coil,
0.2mm stainless steel coil stock,
DZSICO SGS Cold Rolled Stainless Steel Sheet Coil
Ams 5507 316l Stainless Steel Strip In Coils Stock Full Hard 0.6 Inch * 12 Inch Gauge 15 18
WHAT IS 316L STAINLESS STEEL STRIP?
Type 316L is a low carbon austenitic chromium-nickel stainless steel with corrosion resistance similar to type 316 but with resistance to intergranular corrosion following welding.
Coil - Strip, Foil, Ribbon Wire - Profile, Round, Flat, Square
MECHANICAL PROPERTIES AT ROOM TEMPERATURE
Ultimate Tensile Strength: 70 KSI min (485 MPa min) Yield Strength (0.2% Offset): 25 KSI min (170 MPa min) Elongation: 40% min Hardness: Rb 95 max
PROPERTIESOF 316L STAINLESS STRIP IN TEMPERED CONDITIONS
Type 316L can be cold rolled to achieve the temper properties required by specific customers and/ or manufacturing requirements. For tempers 1 /2 hard or above consult Ulbrich Technical Services for more information.
Refer to NACE (National Association of Corrosion Engineers) for recommendations.
# 1 - Hot rolled annealed and descaled. It is available in strip, foil and ribbon. It is used for applications where a smooth decorative finish is not required.
XC - Extra clean bright annealed or bright annealed and cold rolled Grease - Ultra-bright finish (for decorative applications) Soap - Soap is not removed from tempered wire to act as a lubricant. * Contact Ulbrich Wire for custom wire finishes.
COLD FORMING 316L STAINLESS STEEL
Type 316L can be readily formed and drawn.
Type 316L is non hardenable by heat treatment.
Type 316L is weldable by common fusion and resistance methods.
WHAT ARE THE PHYSICAL PROPERTIES OF 316L STAINLESS STEEL?
Density: 0.29 lbs/in3 7.99 g/cm3
Thermal Conductivity: BTU/hr/ft2/ft/°F (W/m•K):
WHAT IS THE CHEMICAL COMPOSITION OF 316L STAINLESS STEEL STRIP?
316L STAINLESS STEEL STRIP APPLICATIONS
|Package and Delivery|
1.Anti-collision package edge
2.Fumigation wooden box:
3.Whole tray packaging machine:
4.Tray Package at the bottom of a solid iron socket for easy handling
|Guide For Ordering Products|
A user need provide the following information while placing order
01.Product designation (steel plates or strips)
02.Product standard number
04.Product specification and size accuracy (incl. thickness, width and length)
06.Surface quality level
08.Type, coating weight and surface treatment in case of coated products
09.Surface structure in case of hot dip galvanized products
13.Other special requirements
Contact Person: admin